Search
  • phmarinawebmaster

Some Mistakes You Should Avoid While You Are Boating

Several boat operators are committing mistakes that are not hard to keep away from being careful enough. Overall, in this article, we will talk to you about some mistakes that can be easily avoided while you are boating and a few pieces of advice about how to make your time on-the-water smooth.


Do Not Exceed Your Skills


If you think that exceeding your skills is fun, well, it is not. It can be catastrophic and expensive in the end. Boating during bad weather is not something you should do unless you want to compromise your life. Do not do risky stuff if you do not have enough skill level!


Make Sure Everyone in the Boat Knows You Are Starting


In case someone is not holding on in your boat, make sure that person knows you are starting before you do so and give him or her time enough to get prepared. Do this, unless you want someone to fall and sustain an injury. Never increase the speed of your boat without everyone aboard knowing that you are going to do so. Make sure everyone is ready before you throttle up!


Dramatic Maneuvers


Do not become deranged in your boat’s movements. You can have someone sustain serious injuries if you start doing crazy maneuvers. Here we apply the same principle stated above: let everyone know whenever you are doing something that will cause acceleration and, also, whenever you are doing something dramatic.


Match Your Boat’s Speed to the Present Conditions


Regardless of whether your boat can exceed some given speed, that does not entail the fact that you should always cruise fast. The speed of your boat should be just smooth enough to not eject the people aboard around. Make sure that you are being attentive to your passengers’ conditions and the conditions of your boat. Going fast all the time is not good for anyone.


Do Not Go too Fast Under Bridges


In case you are going under a bridge, do not go too fast. This can never be stressed enough. Boats passing at cruising speed or faster under a bridge can be very dangerous. Remember that boats lack brakes and that you never know if anyone will appear from the other side of the bridge.


Whenever you are going under a bridge, slow to idle speed. Do not dare to go fast.


Make Sure You Tow the Proper Way


No matter whether certain kinds of lines might work to tow certain vehicles such as skiers, we suggest that you do not make use of any line unless it is polypropylene. This is because this material is the only one capable of floating, so it will help to keep it out of the prop. Also, do not allow anyone to stand close to the tow rope.


Get Your Boat Parts from the Right Place


In case you own a high-performance boat and you need one or more parts, then we have got your back. Whether you require engine packages, fuel or oil filters, propellers, impellers, or anodes, we have all the Volvo Penta parts that you might require.


We also offer a wide variety of Mercruiser parts such as stern drives, oil and fuel filters, transom assemblies, manifolds, impellers, and propellers as well.


We have 34 years of experience in the market and are considered the number one dealer in the United States of America for Volvo Penta. Whatever Volvo Penta or MerCruiser part you might require, do not hesitate to call us at 305-892-2628 to get all the information you need and the best prices.

4 views0 comments

Recent Posts

See All

The Importance of Flushing Your Boat’s Motor

If you’re like most boating aficionados, you typically wash your boat after returning to the dock from a day out on the water. But what about your boat’s motor? Did you take the time to flush it with

Helpful Tips for Maintaining Your Marine Generator

Having a generator onboard your boat is an ideal source of electricity when needed and you don’t want to waste fuel by keeping the motor running. Although you can use an inverter for smaller electrica

Advantages of using a Fuel Stabilizer

As avid boaters, we are driven to protect them, especially when it comes to the motor and ensuring that it’s running in optimal condition. The best way to accomplish this is by using a fuel stabilizer